Manual Gain Control - Foxcom Satlight 7310 Installation And User Manual

7310 Installation and User's Guide

Manual Gain Control

5. Manual Gain Control
All internal adjustments have been set up at the factory; the only user adjustments
are input and output RF signal levels accessible from the front panel and described
in the following sections.
To adjust the Transmitter Gain:
1. Set the input power to the expected power level.
2. Set the gain control to the nominal voltage, 3.5V ± 0.5.
To adjust the Receiver Gain:
1. Set the input power to the expected power level.
2. Set the gain to unity gain.
Foxcom Proprietary Information 37
Document No. 93-005-39-A1