Christie LW400 User Manual page 23

3.1 Configuring and controlling the projector via a web browser (continued)
The schedule settings are shown below.
Item
Schedule
Date (Month/Day)
Click [Apply] button to save the settings.
The current event settings are displayed on the schedule list. To add additional
functions and events, set the following items.
Item
Time
Command
[Parameter]
Power
Input Source
Display Image
Click [Register] button to add new commands to the schedule list.
Click [Delete] button to delete commands from the schedule list.
Click [Reset] button to delete all commands and reset the schedule settings from
the schedule list.
NOTE
• After the projector is moved, check the date and time set for the
projector before configuring the schedules. Strong shock may make the date
and time settings (22) get out of tune.
LIT MAN USR LW400 NTWK GUID
3. Management with Web browser software
Click [Enable] check box to enable the schedule.
Configures the month and date.
This item appears only when Specific date (No. 1-5) is
selected.
Configures the time to execute commands.
Configures the commands to be executed.
Configures the parameters for power control.
Configures the parameters for input switching.
Configures the parameters for display of transfered image
(38)
data .
21
Description
Description
020-000049-01 Rev.1 (04/08)