Weider Pro 7500 User Manual page 12

12. Attach Leg Lever Bumper (75) to the Front Leg
(10) with an M4 x 16mm Self-tapping Screw
(110) and an M4 Washer (104).
Attach the Front Leg (10) to the Right Base (1)
with two M8 Nylon Locknuts (78) and the indi-
cated M8 x 75mm Carriage Bolts (83). Do not
tighten the Nylon Locknuts yet.
13. Attach the Right Frame (9) to the Front Leg (10)
and the Right Upright (2) with two M8 x 65mm
Bolts (101), two M8 x 80mm Bolts (100), four
M8 Washers (103), and four M8 Nylon Locknuts
(78). Do not tighten the Nylon Locknuts yet.
14. Attach the Left Frame (122) to the Left Base
(119) and the Left Upright (120) with two M8 x
80mm Bolts (100), two M8 Washers (103), four
M8 Nylon Locknuts (78), and the two indicated
M8 x 75mm Carriage Bolts (83).
Tighten all the M10 and M8 Nylon Locknuts
(77, 78) used in steps 3–14.
12
104
110
13
9
78
78
10
101
103
14
103
100
103
119
12
75
10
78
78
83
1
78
2
103
78
120
78
122
78
78
83
100