Rear Panel - Beyonwiz DP-P2 User Manual

1 Indicates hard disk space used.
Lights when there is no space left on the HDD.
2
Lights when there is no time information.
3 Lights when a timer recording is programmed in standby mode.
4 Lights when the signal comes out via HDMI.
5 Lights when the signal is High Definition (will be implemented).
6 Indicates the resolution of video output.
7 Lights when the video output is in Progressive Scan mode.
8 Lights when Ethernet connection is set up and enabled.
9 Lights when USB devices or memory cards is connected.
10 Indicates operation mode (TV or Radio).
11 Indicates the current recording status.
12 Lights when Time Shift is enabled.
Indicates playback of content with light on the outer circle and
13
revolving on the inner circle.
14 Indicates the audio format of content.
Lights on FR and FL when the audio output is set to stereo.
15 Lights on all indicators when the audio output is 5.1CH.
No light when the audio output is Pass-through.

3. Rear Panel

1. RF ANT. IN 5. OPTICAL AUDIO
2. RF LOOP OUT 6. S-VIDEO*
3. HDMI 7. COMPONENT (Y/Pb/Pr)
4. COXIAL AUDIO 8. ANALOG A/V OUTPUT*
* These ports can also bypass the external signals connected to the
analog A/V input ports. You can control these ports with the AV
bypass button.
** These ports are for connecting other A/V device such as a set-top
box for a pay-TV service.
Introduction
9. ETHERNET
10. USB
11. ANALOG A/V INPUT**
5