Assembly - First Texas Products Cabela's Platinum Owner's Manual

ASSEMBLY

Assembly is easy and requires no tools.
G
1
Loosen both Locking Collars by rotating 100%
counterclockwise
G
2
Insert the Upper Stem into the S-Rod and click
Silver Button into hole
G
3
Position the lower stem with the silver
button toward the back.
Using the bolt and knurled knob,
attach the search coil to the lower
stem.
G
4
Press the button on the upper end of
the lower stem, and slide the lower stem
into the upper stem.
Adjust the stem to a length that lets
you maintain a comfortable upright
posture, with your arm relaxed at
your side, and the search coil
parallel to the ground in front of you.
G
5
Wind the cable securely around the
stems.
G
6
Insert the plug into the matching
connector on the back of the detector
body. Be sure that the key-way and
pins line up correctly.
G
7
Tighten both locking collars.
G
8
Secure the cable with the 2 velcro straps
provided, one on the lower stem close to the
coil, one on the upper stem, close to the
housing.
Caution:
Do not force the plug in. Excess force will
cause damage.
To disconnect the cable, pull on the plug.
Do not pull on the cable.
4