Target Identification; Dime - First Texas Products Cabela's Platinum Owner's Manual

TARGET IDENTIFICATION

In DISCRIMINATION mode, targets are identified both audibly and
visually as follows:
1. Different pitch tones for different types of metals
2. A 2-digit target I.D.
3. An illuminated icon within the target category best describing it
The detector must be in DISCRIMINATION mode to identify targets.
The ALL METALS mode does not provide target identification.
AUDIO TARGET IDENTIFICATION:
When in the default 4-tone mode, tones identify targets as follows:
BASS TONE
Ferrous objects, such as iron and steel, like nails and tin cans.
Smallest-sized gold objects and steel bottle caps
LOW TONE
Foil, pull-tabs (some new style), nickels, steel bottle caps.
MEDIUM TONE
Newer pennies (post-1982 are minted from zinc)
Larger gold pieces, small brass objects, and most bottle screw caps.
Most recent-vintage non-US coins.
Pull-tabs (old style, some new style)
HIGH TONE
Silver and copper coins, large brass objects
Older pennies (pre-1982 were minted from copper)
Dimes, quarters, half-dollars, silver dollars
Susan B. Anthony and Sacajawea dollar coins
Flattened aluminum cans (with a stronger signal than a coin)
BASS TONE
PostScript Picture
PostScript Picture
(Earring.eps)
(Earring.eps)
Nails, Iron Objects,
& Smallest Gold Objects
Audio Target Identification (ATI) classifies metals into four categories.
LOW TONE
PostScript Picture
(AudioResponses.eps)
Pull Tabs, Nickels,
& Smaller Gold
MEDIUM TONE
PostScript Picture
(RingTWO.eps)
PostScript Picture
(PENNY.eps) PostScript Picture
(PENNY.eps)
Zinc Pennies (Post
1982), Larger Gold
Objects, Many screw caps
HIGH TONE
PostScript Picture
(PENNY.eps)
Copper, Silver & Brass
Copper Pennies (Pre
1982)
19