Assembly - First Texas Products Gamma 6000 Owner's Manual

ASSEMBLY

Assembly is easy and requires no tools.
G
Loosen both Locking Collars by rotating 100%
1
counterclockwise
G
Insert the Upper Stem into the S-Rod and click
2
Silver Button into hole
G
Position the lower stem with the silver
3
button toward the back.
Using the bolt and knurled knob, attach
the search coil to the lower stem.
G
Press the button on the upper end of
4
the lower stem, and slide the lower
stem into the upper stem.
Adjust the stem to a length that lets you
maintain a comfortable upright posture,
with your arm relaxed at your side, and
the search coil parallel to the ground in
front of you.
G
Wind the cable securely around the
5
stems.
G
Insert the plug into the matching
6
connector on the back of the detector
body. Be sure that the key-way and pins
line up correctly.
G
Tighten both locking collars.
7
G
Secure the cable with the 2 velcro straps
8
provided, one on the lower stem close to the coil,
one on the upper stem, close to the housing.
Caution:
Do not force the plug in. Excess force
will cause damage.
To disconnect the cable, pull on the plug.
Do not pull on the cable.
4