Mounting The Lens - JVC TK-C9510E Instructions Manual

Connection/Installation

Mounting the Lens

1 Check the mounting method of the lens before mounting.
This camera is compatible with CS-mount lens.
To use a C-mount lens, a C-mount adapter is necessary. For details on
the C-mount adapter, consult your JVC dealer.
Never use a lens that exceeds the dimension （a） in the below figure as
it will damage the inner part of the camera and will not allow normal
installation. This will result in a malfunction.
Dimension (a)
Flange focus (b)
2 Turn the lens clockwise and mount it securely on the camera.
3 Set the [IRIS VIDEOlDC] Lens selector switch (A page 15) on
the rear panel according to the lens in use.
4 Check the pin arrangement and connect the lens cable to the
socket.
If the plug of the lens cable is different, connect with a four-
Memo
pin plug. For details on the four-pin plug, consult your JVC
dealer. (Part no.: SCV2859-001)
Pin No. DC IRIS lens
1 Damping (-)
2 Damping (+)
3 Driving (+)
4
E-20
: 5.5 mm or below
: 12.5 mm
1 3
2 4
.
Driving (-)
POWER IRIS 4
Video Iris Lens
+9 V (max. 50 mA)
NC
Video Signal
GND
(a)
F
(b)
2
2
4 pin plug