Select the desired temperature units, either °F for Fahrenheit, or °C for
S
Celsius and touch SAVE.
Heat Source (If Applicable)
With the Evolution Connex Control, you can select the desired heat source of your
system, if your system is equipped as a Hybrid HeatR System. Select the HEAT
SOURCE icon from the menu screen.
NOTE: Options available on this screen will correspond to the equipment attached.
The default is for the system to control the heat source.
S
To have only the furnace control, select GAS ONLY.
S
To have only the heat pump, select HEAT PUMP ONLY.
S
To have only electric, select ELECTRIC ONLY.
S
When you have made the appropriate selection, touch SAVE.
S
Zone Names (If Applicable)
With the Evolution Connex Control, you have the ability to customize zone names.
Select the ZONE NAMES icon from the menu screen.
43
A13116