Home Fresh Air Control - Bryant Evolution Connex SYSTXBBECW01-A Owner's Manual

Home Comfort Profile Fresh Air Control
If a ventilator is installed in your home, select the amount of fresh air to
S
circulate during heating mode by touching HEATING FRESH AIR.
You will have the option of choosing among AUTO, MANUAL, or
d
OFF.
The AUTO setting will allow the system to choose the fresh air
d
setting in a range of Low, Medium or High, as selected by you.
The MANUAL setting allows you to select the percentage of fresh
d
air to supply to your home.
Use the Up (Y) and Down (B) buttons to set the desired ventilator
d
speed level.
Press SAVE when finished, or CANCEL to discard any changes.
d
If applicable, next select the amount of fresh air to circulate during cool-
S
ing mode by touching Cooling Fresh Air. Again, you will have the op-
tion of choosing among AUTO, MANUAL and OFF.
Use the Up (Y) and Down (B) buttons to set the desired ventilator
d
speed level.
Press SAVE when finished or CANCEL to discard any changes.
d
Away Comfort Profile Humidity Control
You may wish to have different humidity settings when you're away.
S
Press the Menu area on the Main Screen to access the additional menu
selections. Select COMFORT PROFILES, then select the HUMIDITY
AND FRESH AIR PROFILES option.
Touch AWAY to set your humidity settings while you are away
d
from home to save the most amount of energy.
12