Table of Contents
Advertisement
MaxAttach NAS 6000 Getting Started
If you did not change the server appliance name (host name), the DNS suffix,
n
the workgroup or domain membership, nor the workgroup or domain name, a
reboot restart is not required.
6.
Your first time setup of your MaxAttach NAS 6000 is complete and ready for further
configuration and/or release into production.
16:
Next Steps
If you have only the single a Base Unit equipment shelf enclosure, your system is ready for
use.
For advanced configuration procedures for the Microsoft Windows-Powered Max
Operating System Version 2.0, see the MaxAttach NAS 6000 Administration Guide - PN:
000001628 on your MaxAttach NAS 6000 Installation and Documentation CD.
17:
For More Information
On the supplied MaxAttach NAS 6000 Installation and Documentation CD, see any of the
following for more information:
Quick Start Card for MaxAttach NAS 6000 Base Units
n
Getting Started for MaxAttach NAS 6000 Base Only Systems
n
Getting Started for MaxAttach NAS 6000 Base Plus Systems
n
Getting Started for MaxAttach NAS 6000 Cabinet Rack Systems
n
Getting Started for Disk Array Default Configuration
n
MaxAttach NAS 6000 Installation and Configuration Guide
n
MaxAttach NAS 6000 Administration Guide
n
Microsoft Windows-Powered Max O/S Version 2.0 Help Files
n
Getting Started with Base Only Systems
10/16/01 -- Revision 2.0.03
•
A full reboot takes about 4.5 minutes to complete.
•
Once rebooted, your MaxAttach NAS 6000 server is
ready for use or additional administration and
configuration.
14
Getting Started with Base Only Systems
16: Next Steps
000001630
Advertisement
Table of Contents
