Sidecar Power Connector; Electrical - Champion Sidecars DAYTONA 2+2 Owner's Manual

ELECTRICAL

Motorcycle Wiring Diagram Code (Escort, Daytona)
Pin # Description
1
2
3
4
5
6
7
8
9
10
TILT Switch Wiring Colors (all models)
WIRING LEGEND SIDECAR - red (stop), green (running), black (- battery)
Wiring Description (Most applications require the removal of the seat.)
* Fuse link When connecting wires directly to the positive terminal
of the battery always use a fused connection to prevent fire or
damage to motorcycle and sidecar if a short occurs.
* Ground The ground wire should be connected directly to the battery
ground or negative terminal or to another suitable frame ground. The
ground connection on the sidecar is not connected to the sidecar
frame, however the sidecar frame is connected to the motorcycle
frame.
* Clock The clock signal is used for supplying constant power to
the backup circuit of a stereo. This should be connected directly to the
positive terminal of the battery or any other wire that is always live . IF
you are not installing a stereo in the sidecar this wire can be left
disconnected.
* Accessories This should be attached to the switched accessory terminal of
your bike. If you are already using this circuit, it would be advisable to
SIDECAR POWER CONNECTOR (sidecar side)
Clock
Accessory
Ground
Brake Light
Running Light
Right Turn Signal
Backup Utility
Canopy Switch on Bike
TILT (all models)
TILT (all models)
Positive Battery (+)
Negative Battery (-)
Harness Yellow
Harness Pink
7
Color Gauge
Green 22
Red 18
Black 18
Red 22
White 22
Yellow 22
Blue 22
Orange 22
Yellow 14
Pink 14
Red 14
Black 14
14 Yellow 14
14 Purple 14