Britax Advocate CS User Manual page 19

Child Seat Functions
Chest Clip
Fastening the Chest Clip
Fasten the chest clip by pushing the two halves
together until a click is heard (Fig. A).
Releasing the Chest Clip
1 Squeeze the middle tabs together (Fig. B).
2 Pull the two pieces apart.
Adjusting the Chest Clip
1 Slide the chest clip up or down on the
harness so it is positioned at the middle
of the child's chest, level with the child's
armpits (Fig. C).
2 Slide the HUGS chest pads and comfort
™
pads to a comfortable location for the child.
HUGS™ Chest Pads
WARNING! HUGS chest pads must
™
be installed for forward-facing use. Removal of
HUGS is optional only for rear-facing use.
34
Harness Buckle
Fastening the Harness Buckle
1
2
a
Releasing the Harness Buckle
1
2
b
IMPORTANT: Periodically clean the harness
buckle to ensure safe operation. See page 41.
c
Hold the harness buckle with one hand.
Use your other hand to insert one buckle
tongue at a time into the harness buckle
(Fig. D).
• A proper connection is confirmed with an
audible click after inserting each buckle
tongue.
Brace the rear of the harness buckle with
one hand.
Use your thumb to press the release button
and slide both buckle tongues to remove
from the buckle (Fig. E).
Child Seat Functions
d
e
35