Advertisement
9. Install the
ESATTO
retainer by placing the slot over
the blade of the knob, rotate the
knob until the retainer is vertical,
then slide the retainer into the
hole in the base of the
The knob will then be held in the
ON position.
(See photo #9 & #10).
Photo #9
Photo #10
10. Plug in the
ESATTO
supply.
timer knob
TM
.
ESATTO
TM
to an AC
TM
6
Operation and
Programming
Start / Stop / Tare
To accurately weigh the coffee as
it grinds you must first Tare, (zero
out) the weight of the grounds
bin. To do this place the EMPTY
grounds bin on the weight plat-
form, then press and hold the Tare
button until the display reads 00.0.
The
will now display
ESATTO
TM
only the weight of the coffee as it
is ground.
Press the Start button to start the
grinder. It will stop automatically
stop when the pre-programmed
weight has been ground. If you
would like to Stop the grinder
sooner, press the button a second
time.
Up / Down Arrow
Press either of these buttons
to change the weight value in
Grams, displayed in the LCD
window
Programmable Dosage
Buttons 1 - 2 - 3
Each of these buttons can store
a programmable weight value.
Simply press the up or down ar-
row to select the number of grams
you desire, then press and hold
the button you want the displayed
weight stored to. When the display
Advertisement
