Normal Grinding Operation; Programming Dosing Weights - Baratza vario-w Operation Manual

Normal Grinding Operation

Press the desired button (1, 2,
3). The display LCD will show the
corresponding programmed grind
weight in grams. Press START/
STOP button to begin grinding.
While grinding, the LCD will dis-
play real-time the weight of coffee
in the grounds bin. When the LCD
reaches the programmed weight
(+/- 0.2 gram), the motor will stop
and the display will show the actual
weight in the grounds bin for 3 sec-
onds, then the LCD will reset again
to the programmed weight. The
grinder will only allow for a maxi-
mum of 150 grams to be ground at
one time. At any time during grind-
ing, you can stop the grinding by
pressing the START/STOP button.
The motor will stop and the LCD
will reset to the selected preset
weight.

Programming Dosing Weights

The VARIO-W
TM
three programmable buttons for
weight dosing. The buttons are
simply labeled 1, 2, 3. These pro-
grammable buttons only adjust the
weight of coffee to be ground, they
do not adjust the coarseness of the
grind. Each button comes from the
factory with a preset weight:
1 - 15.0 g, 2 - 30.0 g, 3 - 60.0 g.
You can easily program more or
less grinding weight as follows:
is equipped with
1. Press the up or down arrow just
below the LCD display to adjust
the weight. Press and hold the (up
or down) arrow for 3 seconds to
advance the weight more quickly.
2. Once you have reached the de-
sired weight setting, press the cor-
responding button (1, 2, or 3) and
hold for 3 seconds. The weight
shown in the LCD display will blink
to confirm the setting is stored.
3. Repeat steps 1 and 2 above
for each of the other two button.
The quantity of ground coffee you
need depends on the type of bean,
coarseness of the grind, brewing
method and personal taste. With
use, you will find the most suitable
settings for your personal taste. If
the grinder is unplugged, the grind-
er will retain the stored weights.
6