Argox Xellent X-1000VL User Manual page 43

Ethernet settings and parameters
(X-2300E. X-2300ZE. X-3200E. X-3200ZE):
Item
DHCP DISABLE
ENABLE
IP ADDRESS xxx.xxx.xxx.xxx
SUBNET xxx.xxx.xxx.xxx
MASK
xxx.xxx.xxx.xxx
DEFAULT
GATEWAY
Range
If printer has been connected to a
router, IP address will be assigned
automatically by DHCP server after
power on.
If printer is not connected to a
router, with DHCP disabled,
settings of IP ADDRESS, SUBNET
MASK, and DEFAULT GATEWAY
settings will be available on LCD.
Every time when DISABLE is
changed to be ENABLE, LCD will
prompt "ETHERNET CARD
UPDATE FINISH..."
Then please reboot the printer.
xxx range:0~255
When DHCP is disabled, default IP
address is 192.168.1.100.
If "_" sign appears, that means that
DHCP setting is disabled. On the
contrary, DHCP setting is enabled.
1.
change contents.
(ex. from 000.000.000.000 to
43
Factory
Default
FEED/CONFIG. :
Remarks