Installing A Plug And Play Printer Driver (For Usb Only) - Argox OS-2130D User Manual

Installing a Plug and Play printer driver (for USB only)

Note:
We strongly recommend that you use the Seagull Driver Wizard
instead of the Microsoft Windows Add Printer Wizard when
installing and updating your Drivers by Seagull.
(Even though the "Add Printer Wizard" is from Microsoft, it too
easily performs a number of tasks incorrectly when updating
existing drivers. It also badly handles the situation where a printer
driver is already in use by a Windows application.)
1. Turn off the printer. Plug the power cable into the power
socket on the wall, and then connect the other end of the
cable to printer's power socket. Connect the USB cable to the
USB port on the printer and on the PC.
2. Turn on the printer. If the printer supports Plug-and-Play, and
you have successfully connected it using a USB cable, then
the Windows Add Hardware Wizard will automatically detect
the printer and display a dialog that allows you to install a
driver. Click Cancel and do not install the driver using this
wizard.
3. Prepare the documentation and software CD-Rom from
printer package and then install to CD-Rom drive of your
26
OS-2130D & OS-2130DE User's Manual
computer. The CD-Rom will bring out the following prompt.
Click "Go":
4. Under OS-2130D/ OS-2130DE product selection prompt,
choose Seagull Driver version and then start installation:
OS-2130D & OS-2130DE User's Manual
27