Treatment Of Submerged Motor; Procedure - Yamaha Z150D Owner's Manual

Trouble Recovery
1. Remove the top cowling.
2. Turn on the main switch.
OFF
3. Lift the emergency switch to pump re-
serve oil into the engine oil tank from the
remote oil tank.
1. Emergency switch
1
1. Engine oil tank
2. Remote oil tank
4. After using the emergency switch, turn
75
ON START
ZMU01906
1
ZMU04010
2
ZMU01908
off the main switch, then turn it back on.
This resets the warning system to nor-
mal operation. The yellow segment will
continue to be displayed on the oil level
indicator.
5. Start the engine and return to the near-
est port for more oil.
NOTE:
The maximum reserve oil capacity is 1500
G
3
cm (1.6 US qt, 1.31 Imp qt).
The oil-feed pump will not operate if the
G
engine is tilted up more than 35°. Put the
engine in the upright position (not tilted)
before using the emergency switch.
EMU29760

Treatment of submerged motor

If the outboard motor is submerged, immedi-
ately take it to a Yamaha dealer. Otherwise
some corrosion may begin almost immedi-
ately.
If you cannot immediately take the outboard
motor to a Yamaha dealer, follow the proce-
dure below in order to minimize engine dam-
age.
EMU29790

Procedure

1. Thoroughly wash away mud, salt, sea-
weed, and so on, with fresh water.
2. Remove the spark plugs and face the
spark plug holes downward to allow any
water, mud, or contaminants to drain.
ZMU01909