Auto Power On/Off; Auto Power Down; Sleep Timer Setting; Dimmer - LG NB3730A Owner's Manual

AUTO POWER On/Off

Before operating this function, make sure that you
have selected OPTICAL IN and turn on the AUTO
POWER.
This function automatically turns on/off the unit
when you turn on/off the external device (TV, DVD
Player, Blu-ray Disc Player, etc.) connected to this
unit by the optical cable.
When turning on the unit by this function, Optical
function is selected directly no matter what kind of
function has been selected before turning off it.
This function turns on or off each time you press
AUTO POWER.
Display
AUTO POWER ON
AUTO POWER OFF
,
Note
y This function is intentionally designed to
turn off the unit after 1 minute of inactivity.
If you did not connect external devices with
optical cable or there is no digital audio
signal going to the unit, the unit will turn off
after 1 minute of inactivity if AUTO POWER
function is turned on.
y Depending on the connected device by the
optical cable, this function may not operate.
y Once AUTO POWER is set, the unit will
start as OPTICAL mode automatically next
time, no matter what kind of function you
selected before.
y It is not available to turn on the unit by
AUTO POWER function if you turn off the
unit directly.
y AUTO POWER function is not supported on
LG Sound Sync (Wireless) mode.
NB3530A-NB_DGBRLLK_ENG_1479.indd 17
Operation
AUTO POWER function is
turned on.
AUTO POWER function is
turned off.

Auto power down

This unit will be off itself to save electric
consumption in the case main unit is not
connected to external device and is not used for 25
minutes.
So does this unit after six hours since Main unit
has been connected to other device using analog
input.
But the unit can turns on automatically based on
the [AUTO POWER] function you've set.

Sleep timer setting

Press SLEEP one or more times to select delay time
between 10 and 180 minutes, after the unit will
turn off.
To check the remaining time, press SLEEP.
To cancel the sleep function, press SLEEP
repeatedly until "SLEEP 10" appears, and then press
SLEEP once again while "SLEEP 10" is displayed.
,
Note
You can check the remaining time before the
Unit turns off.
Press SLEEP. The remaining time appears in
the display window.

Dimmer

Press SLEEP once. The display window will be
darken by half. To cancel it, press SLEEP repeatedly
until dim off.
Operating 17
3
2013-02-08 12:21:15