Getting Started - Technika LCD22-218 User Manual

IMPORTANT - AFTER TUNING DO NOT PRESS ANY BUTTONS FOR 20 SECONDS SO THE
TUNING IN
1) Using the RF Cable supplied, connect the TV to the TV Aerial socket (Fig A)
IMPORTANT: If your TV signal is inadequate to receive a good Digital signal, you will need to connect
a 'Signal booster' between your TV and TV Aerial Socket. See section 5.
It is highly unlikely you will receive any/all of the digital channels using an indoor/portable TV aerial.
You should use a Digital/Hi Gain outdoor aerial for optimum signal reception.
2) Connect the Power cable to your electrical outlet and the Television (Fig B above)
3) Switch on the television using the power switch located next to the DVD player
4) Insert the batteries supplied into the Remote control and press the Power/Standby button to power on the TV
You will now be welcomed with the initial set-up screen. Follow the on screen instructions:
5) A) Select country - default is UK
B) Select language - default is English
C) Ensure TV aerial is connected and press OK on the remote control to Tune in the Television
5) If the TV finds some but not all, of the Digital channels the TV is functioning correctly but the signal being
received is not strong enough. (The signal strength needs to be above 85% - you can see the signal strength the
TV is receiving when you change channels/ programmes) you will need to increase the signal strength in order to
recieve all of the channels available. The most economical way to do this is by purchasing and connecting a 'signal
booster' in between the TV and the TV aerial socket. If this does not solve the problem, you will need to upgrade
the TV aerial to a digital hi-gain compatible aerial
Once you have connected a 'Signal booster' you will need to retune the TV in order to receive all of the channels.
Getting Started - Initial Set Up
CHANNEL INFORMATION CAN BE STORED.
Fig A
Connect between TV and TV
Fig B
ATV DVB DVD IPOD
1 2 3 4
Aerial socket
Signal Booster
9