First Time Installation; Reset Television - Technika LCD22-218 User Manual

GENERAL SETTINGS MENU
5) To change Pin Code enter menu. Enter the old pin code (Default is blank), then enter the
new pin code and enter it again. Press [OK], the pin is now changed
6) Press [EXIT] to exit

First Time Installation

Allows you to reset the television for first time tuning.
1) Press [MENU] to enter menu
2) Press [>] to move to General Settings Menu
3) Press [\/] to highlight First Time Installation
4) Press [>] and First time install screen will appear
5) Press [OK] and tuning will commerce.

Reset Television

You may wish to reset the menus to factory settings e.g. if you have forgotten a changed
password
1) Press [MENU] to enter menu
2) Press [>] to move to General Settings Menu
3) Press [\/] to highlight Reset
4) Press [OK] to reset the television
5) Press [EXIT] to exit
TV Menu Operation
Change PIN Code
Old PIN Code
New PIN Code
Enter PIN Code
First Time Installation
Country UK
Language English
Please ensure that the aerial is connected to the connector
labelled ' RF In ' on the rear of the TV .Ensure that OK is
highlighted in yellow and press 'OK' on your remote .If after
this scan ,not all digital channels are found ,your aerial may
require a signal booster .alternatively ,upgrade your aerial
to a high gain digital version .
OK Cancel
23