Table of Contents
Advertisement
Owner's Manual
2. When connecting multiple units, the entire system shut Off and
stopped working.
• There are too many units connected together in one outlet. Make sure
you haven't exceeded the recommended maximum number of connected
units to use in one outlet (6). Remove one or more units from the system
as necessary. Once the unit(s) have been removed, reset the first unit that
is plugged directly into the wall by pushing the Resettable Circuit Breaker
button shown below. You may also need to reset each unit that is
connected to the first unit if the indicator light does not illuminate.
7
6
RESET
(800) 323-9519
SCCPMD1-CH_13EM1.indd 25
5
4
3
2
1
25
3/1/13 9:16 AM
Advertisement
Table of Contents
Troubleshooting
