Fuse/Overload Protection - Crock-Pot Hook-up Owner's Manual

Owner's Manual

Fuse/Overload Protection:

Your system is designed to prevent connecting more than the
recommended number of units (six) to each other. When using multiple
units together, and when necessary, any unit that overloaded the system
will turn itself off.
• Depending on the circuit, you may need to remove one or
more units from your system so the circuit does not trip again
from overload.
• If this happens, simply reset the built in Resettable Circuit
Breaker on the unit that is plugged directly into the wall. To reset
the unit, push the resettable button with your index finger as shown:
Additionally, you may have to reset all the subsequent units that are
connected after the tripped unit that overloaded the system.
• You will notice which units have turned themselves off, as the
Indicator Light will no longer be illuminated on these units.
(800) 323-9519
SCCPMD1-CH_13EM1.indd 17
17
3/1/13 9:16 AM