Crock-Pot Hook-up Owner's Manual page 13

Owner's Manual
5. Connect other units as needed in any combination up to the recommended
total number of six (6) by adding up the "Unit " count (see page 6, View
C for example). Refer to the icon located to the left of the power cord to
determine your unit count. (See Figure A).
Counts as
1
Unit
Figure A
NOTE: Units do not have to be clicked tightly together to function. As long as the
male end is plugged into the female end, the units will be powered on. (See Figure B)
WARNING: Your system was designed to connect only with other
Hook Up™ units. Do not attempt to plug in any other appliances
other than those that are sold within this system.
6. To add additional units, repeat steps 3-5 on previous page.
7. Add your ingredients to the Stoneware of each unit and cover with the
Glass Lid(s).
8. Select the temperature setting (HIGH, LOW or WARM) for each unit
based on your recipe. The Indicator Light on each unit will illuminate,
indicating that your units are on.
NOTE: WARM is only for keeping already-cooked food warm. Do not cook on the
WARM setting.
9. When finished using, turn off and unplug the first unit that is plugged into
the electrical outlet and allow units to cool down prior to cleaning.
WARNING: Do not attempt to lift multiple units at one time when
they are connected together.
10. Once the units have cooled down, separate and pull the system apart using
the integrated handles on the bottom left and right-hand sides of each unit.
11. Once the unit has cooled, store the cord by slowly feeding the cord back
into the base until it clicks into place.
(800) 323-9519
SCCPMD1-CH_13EM1.indd 13
6 5 4 3 2 1
Figure B
13
3/1/13 9:16 AM