Advertisement
Quick Links
50-90mm
AIR NAILER
STOCK No.66492
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE
This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which
should be kept with the machine.
This manual describes the purpose for which this tool has been designed and contains all the necessary
information to ensure its correct and safe use.We recommend that this manual is read before any operation of
the machine, before performing any kind of adjustment to the machine, and prior to any maintenance tasks. By
following all the general safety instructions contained in this manual, it will ensure both machine and operator
safety, together with longer life of the tool itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
machine.
Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tool
policy of continuous improvement determines the right to make modifications without prior warning.
• INSTRUCTIONS •
SAFE AND EFFECTIVE USE OF THIS TOOL.
GENERAL INFORMATION
PART No.AN50-90
09/2001
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Draper AN50-90
Summary of Contents for Draper AN50-90
- Page 1 09/2001 GENERAL INFORMATION This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which should be kept with the machine. This manual describes the purpose for which this tool has been designed and contains all the necessary information to ensure its correct and safe use.We recommend that this manual is read before any operation of...
- Page 2 Getting to Know Your Air Nailer................4 Operation & Use ....................5-8 Maintenance/Troubleshooting .................8 Optional Accessories ..................9 DECLARATION OF CONFORMITY Draper Tools Ltd. Hursley Road, Chandler’s Ford, Eastleigh, Hampshire. SO53 1YF. England. Declare under our sole responsibility that the product: Part No:- AN50-90 Stock No- 66492...
- Page 3 This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorized. Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the guarantee period.
- Page 4 IMPORTANT Draper Tools Limited recommends that this machine should not be modified or used for any application other than that for which it was designed. If you are unsure of its relative applications do not hesitate to contact us in writing and we will advise you.
- Page 5 GETTING TO KNOW YOUR AIR NAILER Fig.1. ✘✌ ✕✌ ✜✌ ✛✌ ✖✌ ✗✌ ✚✌ ✕✖✌ ✕✕✌ ✙✌ ✢✌ ✕✔✌ Fig.1. 1. Hand grip. 7. Magazine latch. 2. Magazine. 8. Air inlet. 3. Trigger. 9. Mini oil can. 4. 360º Rotating Exhaust. 10.
- Page 6 This nailer operates at a maximum of 120PSI and should be controlled via a combined regulator, oil and water separator such as the Draper 4222/3 unit which with proper maintenance will ensure a constant supply of dry air and lubricating oil at all times.
- Page 7 OPERATION & USE LOADING THE MAGAZINE (Fig.2 - 4) Fig.2 Note: Always disconnect the tool from the air supply before any adjustments or maintenance is carried out. Pull the magazine latch ✪✌ back to the rear of the magazine until it engages and locks in place.
- Page 8 The tool should fire. This is correct. FIRING ADJUSTMENT (Fig.7) Fig.7 The AN50-90 has two firing modes: SINGLE SHOT: This allows the trigger to be pulled once after the safety lever has been activated. Push down catch ✰✌ and position to the left.
-
Page 9: Trouble Shooting
Tool will not shut off. ‘O’ ring throttle valve dislodged from seat inlet valve. Replace ‘O’ ring or return to service centre. Note: Repairs should be carried out by a qualified person. DRAPER HELPLINE (023) 8049 4344. - 8 -... -
Page 10: Optional Accessories
OPTIONAL ACCESSORIES PACK STOCK No. PART No. DESCRIPTION LENGTH QUANTITY 66864 AAFN50 2500 NAILS 50mm 50mm 2500 66865 AAFN57 2500 NAILS 57mm 57mm 2500 66866 AAFN64 2000 NAILS 64mm 64mm 2000 66867 AAFN65 2000 NAILS 65mm 65mm 2000 66869 AAFN70 2000 NAILS 70mm 70mm 2000... - Page 11 NOTES - 10 -...
- Page 12 ©Published by Draper Tools Ltd. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.
Need help?
Do you have a question about the AN50-90 and is the answer not in the manual?
Questions and answers