Table of Contents
Advertisement
Quick Links
230V
ELECTRIC
STAPLER/NAILER
15636
These instructions accompanying the product are the original instructions. This document is part of the product, keep
it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before
assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed,
and contains all the necessary information to ensure its correct and safe use. By following all the general safety
instructions contained in this manual, it will ensure both product and operator safety, together with longer life of the
product itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools
policy of continuous improvement determines the right to make modifications without prior warning.
Advertisement
Table of Contents
Related Manuals for Draper STORMFORCE STNEKSF
Summary of Contents for Draper STORMFORCE STNEKSF
- Page 1 All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
-
Page 2: Title Page
Commercial copying, redistribution, hiring or lending is prohibited. No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Draper Tools Limited. In all cases this copyright notice must remain intact. -
Page 3: Table Of Contents
CONTENTS TABLE OF CONTENTS TITLE PAGE INTRODUCTION ......................2 REVISIONS ........................2 UNDERSTANDING THIS MANUAL ................2 COPYRIGHT © NOTICE ....................2 CONTENTS CONTENTS ......................... 3 WARRANTY WARRANTY ......................... 4 INTRODUCTION SCOPE ......................... 5 SPECIFICATION ......................5 HANDLING AND STORAGE ..................5 HEALTH AND SAFETY INFORMATION GENERAL POWER TOOL SAFETY WARNINGS ............ -
Page 4: Warranty 3.1 Warranty
This warranty applies in lieu of any other warranty expressed or implied and variations of its terms are not authorised. Your Draper warranty is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the warranty period. -
Page 5: Introduction
INTRODUCTION SCOPE Ideal for upholstery and furnishing applications and also suitable for repairing fence panels or installing hardboard, etc. It is designed for domestic and light commercial use only. Any other application is considered misuse. SPECIFICATION Stock No..........................15636 Part No. -
Page 6: Health And Safety Information
HEALTH AND SAFETY INFORMATION GENERAL SAFETY INSTRUCTIONS FOR POWER TOOL USE When using any type of power tool there are steps that should be taken to make sure that you, as the user, remain safe. Common sense and a respect for the tool will help reduce the risk of injury. Read the instruction manual fully. -
Page 7: Connection To The Power Supply
HEALTH AND SAFETY INFORMATION before making any adjustments, carrying out maintenance operations or just finishing using the tool. Remove and check setting tools. Some machinery requires the use of additional tools or keys to set, load or adjust the power tool. Before starting the power tool always check to make certain they have been removed and are safely away from the machine. -
Page 8: Technical Description
TECHNICAL DESCRIPTION IDENTIFICATION (1) Trigger. (5) On/off rocker switch. (2) Safety mechanism. (6) Power dial. (3) Chamber. (7) Magazine lock. (4) Plug & cable. (8) Magazine. – 8 –... -
Page 9: Unpacking And Checking
Lay the contents out and check them against the parts shown below. If any part is damaged or missing, please contact the Draper Help Line (the telephone number appears on the Title page) and do not attempt to use the product. -
Page 10: Setting The Stapler/Nailer
SETTING THE STAPLER/NAILER NOTE: Remove the plug from the socket before carrying out adjustment, servicing or maintenance. LOADING STAPLES AND NAILS – FIGS. 1–3 − At the rear of the magazine is the magazine lock (7). To release it, press the lever down and pull. −... -
Page 11: Basic Stapler/Nailer Operations
BASIC STAPLER/NAILER OPERATIONS ON/OFF SWITCH – FIG. 4 − To help prevent accidental firing the appliance features an on/off rocker switch (5). − Position the rocker switch to off when not in use. FIRING THE STAPLER/NAILER – FIG. 5 − Push the appliance firmly down on to the surface to activate the safety mechanism (2). -
Page 12: Maintenance
10. MAINTENANCE AND TROUBLESHOOTING 10.1 MAINTENANCE Regular inspection and cleaning reduces the necessity for maintenance operations and will keep your tools in good working condition. If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his agent in order to avoid a safety hazard. -
Page 13: Optional Accessories
11. OPTIONAL ACCESSORIES 11.1 OPTIONAL ACCESSORIES STAPLES † Stock No. Part No. Length 13959 1006 13960 1008 48951 10010 10mm 48952 10012 12mm 48953 10014 14mm NAILS † Stock No. Part No. Length 59823 AAN15 15mm All measurements shown in millimetres. †... -
Page 14: Explanation Of Symbols
12. EXPLANATION OF SYMBOLS 12.1 EXPLANATION OF SYMBOLS Class II construction Read the instruction manual. (Double insulated). WEEE – Warning! Waste Electrical & Electronic Equipment. Wear suitable eye/face protection. Do not dispose of Waste Electrical & Electronic Equipment in with domestic rubbish. –... -
Page 15: Disposal
13. DISPOSAL 13.1 DISPOSAL – At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is disposed of according to national regulations. – Contact your local authority for details of collection schemes in your area. In all circumstances: •... - Page 16 ©Published by Draper Tools Limited. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.
Need help?
Do you have a question about the STORMFORCE STNEKSF and is the answer not in the manual?
Questions and answers