Pentair Pool Products SMBW 4000 Series Operating Manual
  1. Manuals
  2. Brands
  3. Pentair Pool Products Manuals
  4. Swimming Pool Filter
  5. SMBW 4000 Series
  6. Operating manual

Pentair Pool Products SMBW 4000 Series Operating Manual

Smbw 4000 series
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

FILTER OPERATION. ................................................................................................ 2
SECTION II.
FILTER INSTALLATION. .......................................................................................... 3
SECTION III. TROUBLE SHOOTING ............................................................................................. 6
SECTION IV. TECHNICAL DATA ................................................................................................... 7
REPLACEMENT PARTS ........................................................................................... 7
WARRANTY ............................................................................................................... 8
Before installing this product, read and follow all warning notices and instructions accompanying this filter. Failure to
follow safety warnings and instructions can result in severe injury, death, or property damage. Call (800) 831-7133 for
additional free copies of these instructions.
Attention Installer.
This manual contains important information about the installation, operation and safe use of this product.
This information should be given to the owner/operator of this equipment.
Pentair Pool Products
1620 Hawkins Ave., Sanford, NC 27330 • (919) 774-4151
10951 West Los Angeles Ave., Moorpark, CA 93021 • (805) 523-2400
Rev. D
6-6-02
SMBW 4000 Series
Operating Manual
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS

Table of Contents

Important Notice
™
WARNING
1
Filter
P/N 075157

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SMBW 4000 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Pentair Pool Products SMBW 4000 Series

Summary of Contents for Pentair Pool Products SMBW 4000 Series

  • Page 1 ™ SMBW 4000 Series Filter Operating Manual IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SAVE THESE INSTRUCTIONS Table of Contents SECTION I. FILTER OPERATION....................2 SECTION II. FILTER INSTALLATION................... 3 SECTION III. TROUBLE SHOOTING ..................... 6 SECTION IV. TECHNICAL DATA ....................7 REPLACEMENT PARTS ...................
  • Page 2 SECTION I. FILTER OPERATION. GENERAL INFORMATION. 1. This filter operates under pressure. When closed properly and operated without air in the water system, this filter will operate in a safe manner. 2. Warning labels should be affixed to the top of the filter U.S.
  • Page 3 SECTION II. FILTER INSTALLATION. A. GENERAL INFORMATION WARNING THIS FILTER OPERATES UNDER HIGH PRESSURE. WHEN ANY PART OF THE CIRCULATING SYSTEM, e.g., CLAMP, PUMP, FILTER, VALVE(S), ETC. IS SERVICED, AIR CAN ENTER THE SYSTEM AND BECOME PRESSURIZED. PRESSURIZED AIR CAN CAUSE THE LID TO BE BLOWN OFF WHICH CAN RESULT IN SEVERE INJURY, DEATH, OR PROPERTY DAMAGE.
  • Page 4 10. Provide space and lighting for routine maintenance access. Do not mount electrical controls over filter. Install electrical Table 1. controls (e.g., on/off switches, timers, control systems, etc.) at Vertical least five (5) feet from the filter. This will allow you enough Model Size Clearance Req.
  • Page 5 D. HOW TO CLEAN THE SEPARATION TANK , performed after each backwash operation. (If installed or if applicable.) The purpose of the separation tank is to collect the spent diatomaceous earth during backwashing (cleaning) of the Figure 3. filter. It must be cleaned after each backwash to prevent any clogging problems.
  • Page 6 7. Use garden hose to rinse down filter elements until all debris has been flushed from tank. Then screw drain plug on backwash line on models with Separation Tank. 8. Unscrew wing nut; remove washer and unclip air vent tube from holding wheel. Remove holding wheel. 9.
  • Page 7 O-ring, lid 071439 Seal - valve rotor, tapered 071720 Rotor valve, Noryl w/seal 073370 O-ring 2-113 071435 SMBW 4000 SERIES FILTER Tank Bottom, SMBW 197130 HEAD LOSS CURVE Handle SMBW rotor ss 190026 Handle extension b/w brass 070971 Handle stud bolt ss 1/4-20 x 1.75"...
  • Page 8 FILTER LIMITED WARRANTY ™ Your SMBW 4000 Series filter is a quality product of Pentair Pool Products which warrants that it is fit for ™ the ordinary purposes for which such equipment is used, is adequately contained, packaged and labeled, and conforms to the representations made on the container or label.

This manual is also suitable for:

Smbw 4024Smbw 4036Smbw 4048Smbw 4060

Table of Contents