Connections To Your Tv - LG DR7621W Owner's Manual

Connections (Continued)
Tips
Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the recorder. Use only one of the connections
described below.
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
Caution
– Make sure the DVD Recorder is connected directly to
the TV. Tune the TV to the correct video input chan-
nel.
– Do not connect the DVD Recorder's AUDIO OUT jack
to the phono in jack (record deck) of your audio sys-
tem.
– Do not connect your DVD Recorder via your VCR.
The DVD image could be distorted by the copy pro-
tection system.
Rear of TV
S-VIDEO
INPUT
S
14
VIDEO
AUDIO INPUT
COMPONENT VIDEO INPUT
INPUT
Y Pb Pr
L R
C A V
Rear of the recorder

Connections to Your TV

Make one of the following connections, depending on
the capabilities of your existing equipment.
Video connection
Connect the VIDEO OUT jack on the DVD Recorder to
the video in jack on the TV using the video cable (V).
S-Video connection
Connect the S-VIDEO OUT jack on the recorder to the
S-Video in jack on the TV using the S-Video cable (S).
Component Video connection
Connect the COMPONENT VIDEO OUT jacks on the
DVD Recorder to the corresponding input jacks on the
TV using an Y Pb Pr cable (C).
Progressive Scan connection
If your television is a high-definition or "digital ready"
television, you may take advantage of the recorder's
progressive scan output for the highest video resolution
possible. If your TV does not accept the Progressive
Scan format, the picture will appear scrambled if you try
Progressive Scan on the recorder.
Connect the COMPONENT VIDEO OUT /
PROGRESSIVE SCAN jacks on the recorder to the
corresponding in jacks on the TV using the Y Pb Pr
cable (C).
Notes :
Set the Progressive to "On" on the setup menu for
progressive signal, see page 20.
Set the progressive to "Off" by removing any disc
from the unit and close the disc tray. See that "NO
DISC" is displayed on the display window. Then
press STOP and hold it for five seconds before
releasing it.
Progressive scan does not work with the analog
video connections (yellow VIDEO OUT jack) or
S-VIDEO connection.
Audio (Left/Right) Connection
Connect the left and right AUDIO OUT jacks of the DVD
Recorder to the audio left and right IN jacks on the TV
using the audio cables (A). Do not connect the DVD
Recorder's AUDIO OUT jack to the phono in jack
(record deck) of your audio system.