Filter Change Reminder; Temporary And Permanent Hold Feature - Pro 1 IAQ T705 Operating Manual

Filter Change Reminder

If your installing contractor has configured
the thermostat to remind you when the air
filter needs changed, you will see FILT in the
display when your air filter needs changed.
FILT will be shown in the display after your
system has run long enough to require an air
filter change.
Resetting the filter change reminder: When
FILT reminder is displayed, you should
change your air filter and reset the reminder
by holding down the second button from the
top left side of the thermostat for 3 seconds.
Hold down for 3 seconds,
to reset filter reminder.
PROGRAMMING THE THERMOSTAT

Temporary and Permanent Hold Feature

Temporary hold:
HOLD and RUN SCHED on the left of your
screen when you press the
If you do nothing, the temperature will remain
at this setpoint temporarily until the next
program period begins. Your program
setpoint will then replace your temporary
setpoint.
Permanent hold:
see HOLD appear below the setpoint tem-
perature in the display. The thermostat will
now permanently stay at this setpoint and can
be adjusted using the
To return to program:
exit either temporary or permanent hold.
The thermostat will display
or
If you press HOLD, you will
keys.
or
Press RUN SCHED to
key.
5