Advertisement
Easy to use controls
1
6
3
LCD Display:
1
See page 2 for details about this display
read out and icons.
2
Glow in the Dark Light Button:
The glow in the dark light button will
self illuminate for several hours after
exposure to ambient light. This button
turns on the display light when pressed.
Fan Switch:
3
Select ON or AUTO. ON will run
the fan continuously. AUTO will cycle
the fan on only when the heating or
cooling system is on.
2
5
4
THERMOSTAT OPERATION
Caution:
When the battery icon
appears replace your AA
batteries immediately. Failure
to do so may result in your
heating & cooling system
becoming inoperable.
4
System Switch:
Selects the operation mode of your
HVAC system. Selecting HEAT turns
on the heat mode. Selecting COOL
turns on the air conditioning mode.
Selecting OFF turns both heating
and cooling off.
5
Temperature Setpoint Buttons:
or - buttons to select the
Press the
+
desired room temperature.
6 User Buttons:
Use these buttons to set up your
programming options. Refer to the
next page for instructions.
3
Hide quick links:
Advertisement
