Set Time; Set Program Schedule - Pro 1 IAQ T705 Operating Manual

Set Time

Follow the steps below to set the current time:
Press MENU
1.
2. Press SET TIME
3.
Day of the week will be flashing.
Use the or
day of the week.
4. Press NEXT STEP
5. The current hour is flashing.
Use the or
hour. When using 12-hour time, make sure the
correct a.m. or p.m. choice is selected.
6. Press NEXT STEP
7. Minutes are now flashing.
Use the or
current minutes.
8. Press DONE when completed

Set Program Schedule

To customize your program schedule, follow these steps
Weekday:
1. Select HEAT or COOL from the system switch.
Note: You have to program heat and cool each
separately.
Press MENU
2.
3. Press SET SCHED. Note: Monday-Friday is displayed
and the WAKE icon is shown. You are now program-
ming the wake time period for the weekday setting.
4. Time is flashing. Use the
your time selection for the weekday WAKE time period.
5. Press NEXT STEP
6.
The setpoint temperature is flashing. Use the
key to make your setpoint selection for the weekday
wake period.
7. Press NEXT STEP
8. Repeat steps 4 through 7 for weekday LEAVE time
period, for weekday RETURN time period, and for
weekday SLEEP time period.
PROGRAMMING THE THERMOSTAT
key to select the current
key to select the current
key to select
or key to make
Important:
You will see a TECH SET
option after the MENU key
is pressed.
This TECH SET key is for
installer configuration and
should NOT be changed
unless you consult your
Professional Heating and
Air Conditioning Technician.
Saturday:
9. Repeat steps 4 through 7 for
Saturday WAKE time period,
for Saturday LEAVE time
period, for Saturday RETURN
time period, and for Saturday
SLEEP time period.
Sunday:
10. Repeat steps 4 through 7 for
Sunday WAKE time period,
for Sunday LEAVE time
period, for Sunday RETURN
time period, and for Sunday
SLEEP time period.
or
4