Advertisement
Quick Links
TROUBLESHOOTING
Problem
No picture, no sound
Improper connection with 12v power adapter. Use of
unauthorized power supply. Power Switch is on OFF
position
No picture
Check whether AV cable is securely plugged in
No sound
Check whether audio connector is secure, or the sound
volume is turned off or down
Dark picture
Ensure that bright and contrast settings are properly
adjusted. Ensure monitor is warm enough
No color
Ensure color settings are properly adjusted in menu
Upside down or lateral
Check horizontal/vertical adjustment on remote.
inverted picture
No car-backing function
Event trigger is not securely connected
(i.e. Picture)
Remote Controller Fault
Battery may be dead or improperly installed:
replacement battery Model:CR2025,3V
Remote controller is not pointed in the direction of the
receiving sensor: Make sure remote is pointed at the
monitor
Long distance or improper angle: The effective distance
between the remote controller and the receiving sensor
is 7 meters and the angle is ±30°.
Obstacle: Move any obstacles out of the path
Dakota Micro, Inc.
8659 148th Ave. SE
Cayuga, ND 58013
www.dakotamicro.com
Possible Causes
Quad View Monitoring System
User Guide
Part Numbers: DMOV-7M-C1(2)
www.dakotamicro.com
Advertisement
Related Manuals for Dakota Micro DMOV-7M-C1(2)
Summary of Contents for Dakota Micro DMOV-7M-C1(2)
-
Page 1: Troubleshooting
Long distance or improper angle: The effective distance between the remote controller and the receiving sensor is 7 meters and the angle is ±30°. Obstacle: Move any obstacles out of the path Dakota Micro, Inc. 8659 148th Ave. SE Cayuga, ND 58013 www.dakotamicro.com... - Page 2 Consumer Limited Warranty (North America ONLY) FEATURES Dakota Micro, Inc. (Hereinafter referred to as DM) warrants to the • 7” LED Backlit, high resolution TFT LCD screen capable of displaying 4 cameras first consumer purchaser that this DM brand product will be free from •...
-
Page 3: Included Components
Included Components Monitor I. Monitor Introduction LED Backlit Sun Visor LCD Screen A/V output Monitor w/ bracket Monitor remote control Power/Video harness Earphone Remote Receiver Vol- Vol+ Menu Bracket Down *Camera(s) w/ bracket *20M power/video cable(s) 12v lighter adaptor Up/CAM Selection Camera Switch *DMOV-7M-C1 includes x1 camera and x1 power/video cable ON/OFF... - Page 4 Monitor Camera III. Install/Remove Sun Visor Bracket Screws Installation Bracket Screws Top Clip-buckle OverView Mounting Bracket Camera Complete Bottom Clip-buckle Remove Top Clip-buckle Mounting Bracket Base Camera Specifications Image pick-up Device 1/3" Sharp Color CCD TV System NTSC/PAL (depending upon model) Lens Mount 420 TV lines IV.
-
Page 5: Remote Control
Remote Control Monitor III. Button Function V. Monitor Operation: MUTE Press Mute to turn sound off ，to resume volume, press Mute again o r p ress V OL+ P OWER F or O N/OFF CH (D o wn) To s elect m e nu CH (U p ) Vol - Menu ON/Standby... - Page 6 Monitor Remote Control I. Introduction c. SYSTEM Mute SYSTEM ON/Standby LANGUAGE ENGLISH Volume+ CAM Selection Menu SELECT ADJUST Volume- Down Call Press Up/Down to select Lang u ag e , pr e ss Vol+/- to select Chinese/English. Mode Sleep Language Quad View Mode Switch Calendar Horizontal Flip...