Century CW2900 Insert Installation And Operation Manual page 51

CW2900 Installation and Operation Manual
Once the faceplate is
assembled, align the notches,
located at the top of each side
of the faceplate opening, with
the top of the insert and slide
the assembly toward the front
of the insert (see DETAIL A).
Center the insert into the
fireplace opening. Adjust its
height using the leveling bolts
on each side of the convection
air jacket box until the faceplate
is properly seated on the floor
of the hearth extension.
Then install one faceplate
retainer spring on each side of
the faceplate and attach the
other end of the spring to the
brackets on the left and right
sides of the insert as shown in
DETAIL A. Push the faceplate
against the fireplace's front.
51