Safety Information; Summary Of Installation Cautions And Warnings; Regulations Covering Insert Installation - Century CW2900 Insert Installation And Operation Manual

Us environmental protection agency phase ii certified wood insert
Table of Contents

Advertisement

CW2900 Installation and Operation Manual

7 Safety Information

7.1 Summary of Installation Cautions and Warnings

THE INFORMATION GIVEN ON THE CERTIFICATION LABEL AFFIXED TO THE
APPLIANCE ALWAYS OVERRIDES THE INFORMATION PUBLISHED, IN ANY
OTHER MEDIA (OWNER'S MANUAL, CATALOGUES, FLYERS, MAGAZINES
AND/OR WEB SITES).
MIXING OF APPLIANCE COMPONENTS FROM DIFFERENT SOURCES OR
MODIFYING COMPONENTS MAY RESULT IN HAZARDOUS CONDTIONS. WHERE
ANY SUCH CHANGES ARE PLANNED, STOVE BUILDER INTERNATIONAL INC.
SHOULD BE CONTACTED IN ADVANCE.
ANY MODIFICATION OF THE APPLIANCE THAT HAS NOT BEEN APPROVED IN
WRITING BY THE TESTING AUTHORITY VIOLATES CSA B365 (CANADA), AND
ANSI NFPA 211 (USA).
CONNECT THIS INSERT ONLY TO A LISTED STAINLESS STEEL CHIMNEY LINER
FOR USE WITH SOLID FUEL.
IF REQUIRED, A SUPPLY OF COMBUSTION AIR SHALL BE PROVIDED TO THE
ROOM.
DO NOT CONNECT TO OR USE IN CONJUNCTION WITH ANY AIR DISTRIBUTION
DUCTWORK UNLESS SPECIFICALLY APPROVED FOR SUCH INSTALLATION.
DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE SERVING ANOTHER
APPLIANCE.
THE INSERT AND ITS STAINLESS STEEL CHIMNEY LINER ARE TO BE
INSTALLED ONLY WITHIN A LINED MASONRY CHIMNEY AND MASONRY
FIREPLACE CONFORMING TO BUILDING CODES FOR USE WITH SOLID FUEL.
DO NOT REMOVE BRICKS OR MORTAR FROM THE EXISTING FIREPLACE
WHEN INSTALLING THE INSERT.

7.2 Regulations Covering Insert Installation

When installed and operated as described in these instructions, the CW2900 wood insert
is suitable for use in residential installations. The CW2900 wood insert is not intended for
installation in a bedroom.
In Canada, the CSA B365 Installation Code for Solid Fuel Burning Appliances and
Equipment and the CSA C22.1 Canadian National Electrical Code are to be followed in the
absence of local code requirements. In the USA, the ANSI NFPA 211 Standard for
Chimneys, Fireplaces, Vents and Solid Fuel-Burning Appliances and the ANSI NFPA 70
National Electrical Code are to be followed in the absence of local code requirements.
31

Advertisement

Table of Contents
loading

Table of Contents