Speaker - Yamaha RX-V375 Owner's Manual

Speaker

Configures the speaker settings manually.
S e t u p
S p e a k e r C o n f i g u r a t i o n
H D M I D i s t a n c e
S o u n d L e v e l
E C O E q u a l i z e r
F u n c t i o n T e s t T o n e
L a n g u a g e
■
Configuration
Configures the output characteristics of the speakers.
• When you configure the speaker size, select "Large" if the woofer diameter of your speaker is 16 cm
(6-1/4") or larger or "Small" if it is smaller than 16 cm (6-1/4").
❑ Subwoofer
Selects whether or not a subwoofer is connected.
Settings
Select this option when a subwoofer is connected.
Use (default)
The subwoofer will produce LFE (low-frequency effect) channel audio
and low-frequency components from other channels.
Select this option when no subwoofer is connected.
None The front speakers will produce LFE (low-frequency effect) channel
audio and low-frequency components from other channels.
❑ Front
Selects the size of the front speakers.
Settings
Select this option for small speakers.
Small (default) The subwoofer will produce front channel low-frequency components
(configurable in "Crossover").
Select this option for large speakers.
Large The front speakers will produce all of the front channel frequency
components.
• "Front" is automatically set to "Large" when "Subwoofer" is set to "None".
❑ Center
Selects whether or not a center speaker is connected and its size.
Settings
Select this option for small speakers.
Small (default)
The subwoofer or front speakers will produce center channel
low-frequency components (configurable in "Crossover").
Select this option for large speakers.
Large
The center speaker will produce all of the center channel frequency
components.
Select this option when no center speaker is connected.
None
The front speakers will produce center channel audio.
❑ Surround
Selects whether or not surround speakers are connected and their sizes.
Settings
Select this option for small speakers.
Small (default)
The subwoofer or front speakers will produce surround channel
low-frequency components (configurable in "Crossover").
Select this option for large speakers.
Large
The surround speakers will produce all of the surround channel
frequency components.
Select this option when no surround speakers are connected.
None
The front speakers will produce surround channel audio. Virtual
CINEMA DSP works when you select a sound program.
❑ Crossover
Sets the lower limit of the low-frequency components that can be output from a speaker
whose size is set to "Small". A frequency sound lower than the specified value will be
produced from the subwoofer or front speakers
Settings
40 Hz, 60 Hz, 80 Hz (default), 90 Hz, 100H z, 110 Hz, 120 Hz, 160 Hz, 200 Hz
• If the volume and crossover frequency are adjustable on your subwoofer, set the volume to half and
crossover frequency to maximum.
CONFIGURATIONS ➤ Configuring various functions (Setup menu)
57
En