Table of Contents
Advertisement
D3232
2. Power connection
Do not connect mains to the desktop power supply before connecting the power supply to the
router.
Connect the DB9 female connector from the desktop power supply to the main unit. Tighten the screws to
assure a proper contact. To connect mains to the desktop power supply you need a mains cord with IEC
320 connector.
The D3232 is normally delivered with the desktop power model AC ±5V / 30W. Upon customer request,
D3232 can also be delivered with DC ±5V / 30W, which may be fed by a 36 – 72 VDC mains power
source. A Frame mounted power supply solution is also available.
Please refer to the latest VikinX Product Catalogue for power supply types, or call Network Electronics
ASA for this information.
If any third party power supply is used the D3232 router requires +5V DC with a minimum current of
800mA. The following pin-out is used on the DB9 male power connector:
Pin 1
0V
Pin 2
+5V
Rev. 4
7
Advertisement
Table of Contents
