What's In The Box; Tools Of The Trade; Installation; Finding Speaker Mounting Locations - Orion XTR52 Owner's Manual

WHAT'S IN THE BOX

Included in this box are all the necessary mounting hardware and cables for your basic
installation. Listed below is a detailed list of the components included in this system package.

TOOLS OF THE TRADE

Listed are the majority of the tools required to perform the installation. Having the proper tools
will make the installation much easier. It is very difficult when you get half way through the
installation and discover that you require a specific tool to get yourself through a particular part
of the installation. Some of these tools are necessities. Some make the job much easier.

INSTALLATION

The performance of the Orion Component Loudspeaker is directly proportional to the quality of
installation. Care taken during the installation process will be rewarded with years of satisfying
performance. If you are unsure about your installation capabilities, please refer to your local
Authorized Orion Dealer for technical assistance. Orion dealers are trained professionals
dedicated to extracting the maximum performance out of your Orion system. If you decide to
install this speaker system yourself, please read the entire installation section before starting
your installation.

FINDING SPEAKER MOUNTING LOCATIONS

Choosing the correct speaker locations will have the greatest effect on the sound quality of the
system. Different considerations are needed when choosing the locations that best suit your
needs. The locations must be large enough for the speakers to fit. Care is needed to ensure that
2
Model Number:
Serial Number:
Date of Purchase:
Quantity
1
2
2
2
2
2
1
2
o Marking Pen
o 1/4" Drill Bit
o 1/8" Drill Bit
o 3/8" Drill Bit
o Hole Saw Arbor
o Wire Crimpers
o 4-3/4" Hole Saw (5-1/4" mid/woofer install)
o 5" Hole Saw (6-1/2" mid/woofer install)
o 2" Hole Saw (for flush mount tweeter installation)
© 2012 MD Audio Engineering—all rights reserved
Description
Owner's Manual
Orion Tweeter Elements
Surface mount hardware
Flush mount hardware
Orion mid/woofer speakers
Passive crossovers with cables
Mounting template
Grilles
Mounting screws
o Electric Drill
o Phillips Screwdriver
o Volt/Ohm Meter (Optional)
o Needle Nose Pliers
o Assorted Tin Snips
o Wire Strippers