Table of Contents
Advertisement
Parameter
1, 2, 5.5, 11MBps
3.2
Link State
In the "Link State", you can make connection to the wirelss devices and immediately
monitor the link status.
Parameter
Current Channel
Data Rate
Description
•
Not Used – Prohibits the device from operating at the
specified data rate.
•
Used – Allows the device operating at the specified data rate
•
Basic – Restrict the device to operate at least at the specified
data rate. At least one kind of data rate has to be set "Basic".
Click "Apply" button to save the above configurations, click
"Undo" button to cancel the settings.
Note: The data rate is auto fallback among the range of the
used data rate in case obstacles or interference.
Description
Shows the current channel used in the wireless connection
Shows the data rate of the connection.
9
Advertisement
Table of Contents
