Table of Contents
Advertisement
Parameter
Fragement Threshold
RTS Threshold
Beacon Interval
Power Save
Use Short Preamble
Turn Off Radio
Show Icon in System Tray
Channel
Data Rate
Auto Rate Select
Description
The value defines the maximum size of packets, any packet size
larger than the value will be fragmented. If you have decreased
this value and experience high packet error rates, you can
increase it again, but it will likely decrease overall network
performance. Select a setting within a range of 256 to 2432 bytes.
Minor change is recommended.
Minimum packet size required for an RTS (Request To Send). For
packets smaller than this threshold, an RTS is not sent and the
packet is transmitted directly to the WLAN. Select a setting within
a range of 0 to 2432 bytes. Minor change is recommended
This value specifies the duration between beacon packets
(milliseconds). The beacon packets include the adapter's
information and are broadcasted to the WLAN network periodly.
The beacon period is fixed in 100ms.
•
CAM(Continuous Access Mode) – Adapter will always set in
active mode.
•
Max – Enable the adapter in the power saving mode when it is
idle.
•
Fast – Enable the adapter in the power saving mode when it
is idle, but some compoents of the adapter is still alive. In this
mode, the power consumption is larger than "Max" mode.
The preamble defines the length of the CRC block for
communication between the Access Point and the adapter. High
network traffic areas should use the shorter preamble type.
When the setting is checked, the wireless connection of the
adapter will be disabled.
Enable or disable the icon shown in the taskbar.
Select the number of the radio channel used for the networking.
The parameter is not active in the infrastructure operation mode.
When it is enabled, the device will choose the most suitable
transmission rate automatically
8
Advertisement
Table of Contents
