About This Guide; Related Documentation; Document Conventions - Cisco 10000 Series Troubleshooting Manual

Related Documentation

Chapter
Chapter 5: Cisco 10000
Series Router Alarms and
Error Messages
Chapter 6: Troubleshooting
Serial Lines
Chapter 7: Replacing or
Recovering Passwords
Appendix A: Unsupported
IOS Commands
Appendix B: Recommended
Tools and Test Equipment
Index
Related Documentation
When troubleshooting the Cisco 10000 series router, use the Cisco 10000 Series Router
Troubleshooting Guide in conjunction with the following documents:
•
•
For additional information about the Cisco 10000 series router, refer to the Cisco 10000 Series Router
Hardware Installation Guide. For more information about the Cisco IOS software that runs on the
router, refer to the Cisco IOS command reference books and configuration guides.

Document Conventions

Command descriptions use the following conventions:
boldface font
italic font
[ ]
{ x | y | z }
[ x | y | z ]
Cisco 10000 Series Router Troubleshooting Guide
viii
Release notes for the Cisco 10000 series router—Provides the most up-to-date information about
software version requirements for using the router. It also provides information about bugs and
workarounds.
Cisco 10000 Series Router Line Card Hardware Installation Guide and Cisco 10000 Series Router
Line Card Configuration Guide—Contain detailed information on line card configuration and
administration.
Commands and keywords are in boldface.
Arguments for which you supply values are in italics.
Elements in square brackets are optional.
Alternative keywords are grouped in braces and separated
by vertical bars.
Optional alternative keywords are grouped in brackets and
separated by vertical bars.
Description
Alarms and error messages that can be raised on the Cisco 10000
series router.
Methods for detecting and correcting data errors on the Cisco 10000
series router serial interfaces.
How to recover a lost enable or console login password, and how to
replace a lost enable secret password on the Cisco 10000 series router.
A list of the commands that are not supported in IOS
Release 12.0(9)SL for the Cisco 10000 series router.
A list of basic tools and test equipment necessary to perform
maintenance and troubleshooting tasks on the Cisco 10000 series
router.

About This Guide

OL-0439-02