Time Cards - Pyramid 4000 User Manual

mark and will round "back" up to 3 minutes after every 5-minute
mark.
3. 10 MIN – This is the "10 minute rule". With this option, the clock
in/out and running totals will be rounded to the nearest 10 minute
mark and will round "forward" at 5 minutes before the 10 minute
mark and will round "back" up to 5 minutes after every 10 minute
mark.
4. 15 MIN – This option is known as the "15 minute rule" or the "7/8
rule" and is the most commonly used. With this option, the clock
in/out and running totals will be rounded to the nearest 15 minute
mark, therefore, up to 7 minutes before the 15 minute mark, the
starting time used to calculate the pay totals will move ahead to the
nearest 15 minute mark.
Up to 8 minutes after every 15-minute mark, the starting time used
to calculate the pay totals will move back to the nearest 15-minute
mark. For example, if a person clocks in at 7:52, the PTR-4000 will
calculate the time totals starting at 7:45, however, if the next
individual clocks in at 7:53, the PTR-4000 will calculate the time
totals starting at 8:00. Conversely, if an individual clocks in at 8:07,
the time totals will calculate assuming an 8:00 start time. If the next
individual clocks in at 8:08, then the totals will be calculated
assuming an 8:15 start time.
Press SELECT to return to the main display.
The 4000/4000HD uses special time cards (item #44100) that are pre-
numbered 1-100.
numbered time card during the same pay period. Do not cover the black
rectangles on the left side of the time cards. The same time card is used
for weekly, bi-weekly, semi-monthly, and monthly pay periods; however,
the print format will be different as noted below.
WEEKLY– In this mode the time card will accept up to 28 punches per
period which will allow for 7 days and four punches per day,however it is

TIME CARDS

As noted prior, you cannot use two of the same
9