Step 1 - Where Will You Install; Step 2 - Check Your Connector Type - Klipsch LightSpeaker Owner's Manual

Instruction Manual
Step 1: Decide which light will be replaced with
®
LightSpeaker 5.
®
Your Klipsch LightSpeaker
designed to cover large areas, however if the location of
your fixtures allow you to do so, you should think about
how you use your room and where you are likely to spend
most of your time. Then choose the fixtures that are most
evenly spaced to your preferred listening position.
WARNING!
Turn off circuit breakers
to all lighting fixtures you
are working on!
A) Turn off the circuit breaker and light switch, to the
bulb you intend to replace with a LightSpeaker
B) Remove the existing light
bulb.
Step 2: Check your connector
type. Your Klipsch
5 is designed to fit into a standard
Edison connector. It will not fit any
other type connector.
STOP!
Check your
connector!
Tech Support: 1-800-KLIPSCH
®
5 has been specifically
® ®
LightSpeaker
®
5.
9