Dmx Control - Martin AF-1 MkII User Manual

To set timer operation using the remote control:
1. Set the desired amount of airflow using the SPEED control
2. Set wait/off time intervals between operating periods by setting the
3. Set duration of operating periods by setting the RUN control to
4. Set the STANDBY button to ON
5. Set the TIMER ON button to ON.
The CYCLE LED lights when the timer function is active.
To extend timer settings, press the X8 button. This will multiply both RUN
and DELAY times by 8.

DMX control

Fan speed on the AF-1 MkII™ and AF-2™ can be controlled using a DMX
controller.
DMX controller operation
When a fan is powered on, the Data LED next to the DIP-switch will light
when a valid DMX signal is received.
Increase the value on the machine's DMX control channel to increase fan
speed as shown below:
DMX control channel levels
Level
0-27
28-255
20
DELAY control to between 1 and 9.
between 1 and 9.
Percentage
0-10%
11-100%
AF-1 MkII™ and AF-2™ user manual
Effect
Fan speed zero.
1 - 100% fan speed.