Programmable Features - Jeep Wrangler 2014 User Manual

ELECTRONICS

PROGRAMMABLE FEATURES

Electronic Vehicle Information Center (EVIC)
• The EVIC can be used to program the following Personal Settings. Press and
release the MENU button until Personal Settings displays, then press the DOWN
button to scroll through the settings. Press the SELECT button
the setting.
• Language
• Auto UNLK On Exit
• RKE Unlock
• Sound Horn With RKE Lock
• Flash Lamp With Lock
• Headlamp Off Delay
• Headlamps With Wipers
• Key-Off Power Delay
Key Fob Programmable Features
• The following features may also be programmed by using the Key Fob transmitter
or the ignition switch and driver's door lock switch.
NOTE:
Pressing the LOCK button while you are inside the vehicle will activate the Vehicle
Security Alarm. Opening a door with the Vehicle Security Alarm activated will cause
the alarm to sound. Press the UNLOCK button to deactivate the Vehicle Security
Alarm.
Flashing Lamps With Lock
• The turn signal lights flashing, when the doors are locked or unlocked, feature can
be turned on or off. To turn this feature on or off:
• Press and hold the UNLOCK button for at least 4 seconds, but no longer than
10 seconds. Then, press and hold the LOCK button while still holding the
UNLOCK button.
• Release both buttons at the same time.
86
• Illumin Approach
• Hill Start Assist (HSA)
• Display Units of Measure In
• Nav – Turn by Turn
• Display Fuel Saver
• Compass Variance
• Calibrate Compass
to change