Installing The Handlebar - C.A.T. Compact Adult Tricycle Owner's Manual

Installing the Handlebar

Installing the Front Light
Slip the handlebar over
the top of the front fork.
Lower the collapsible
handlebar by pulling down
on the handle. This will
expose the nut which must
be tightened.
Once it is tight, raise the
handlebar back into place
and pull up on the handle.
Note: The collapsible
handlebar connector
faces slightly to the left of
center in order to enable
the handlebar to collapse
with the basket in place.
Tighten the screw on
the side of the light
with the supplied
screwdriver. Do Not
overtighten.