9. Handlebar
Charger
Allen wrench 17-19 mm
Allen wrench 14-17 mm
Allen wrench 8-10 mm
Screwdriver
Open end wrenches
Fuses and basket hardware in bag
18. Safety Wheels
19. Rear Wheels
Tool Kit
Assembling the C.A.T.
Unpack the C.A.T. and inspect all
the parts to insure all are included.
Please contact your C.A.T. dealer
immediately if any parts are
missing.
Place your C.A.T. on a flat, clean
surface.
Remove the bolts and nuts from
the connecting tube clamp. Place
the connecting tube into the top
opening and slip the connectors
and wires through the hole in the
frame.