Table of Contents
Advertisement
4. Depress lever about 10 times
Depress lever about
Bremshebel circa 10
10 times
mal anziehen
Caliper brake
Release counter nut A and turn adjustment screw B counter clockwise until the
distance between brake pads and rims is approx. 2mm on each side.
Tighten counter nut A.
- In case adjustment screw B is released already to the limit, please release cable
clamping screw C and turn adjustment screw clockwise to its original position.
- Close the caliper brake with your hand to the rim , adjust the brake cable and tighten
clamping screw C. Please note the table of tightening torques at the end of this file.
- Finally make the fine tuning with adjustment screw B as mentioned above.
The wheel needs to spin free without touching the brake pads. Fix counter nut A.
Important:
Make sure that the brake works perfectly.
Important:
Under wet conditions the brake performance can decrease which will result in a
prolongation of the braking distance.
8
BIKE OWNERS MANUAL
B
A
C
light systems
- light the front and rear lights by the beginning of the dusk. To switch on the dynamo
press with the thumb on the button. But never while riding! To check the function of
front and rear light turn the raised front wheel.
- Under wet conditions the effectiveness of the dynamo may decrease.
bicycle helmet and clothing
- Please take care that your child wears clothing with bright colors and, if possible,
with reflective stripes or fabrics.
- A helmet that fits is the best way to avoid head injuries. The helmet should meet
DIN EN 1078 and should have the CE label. By choosing bright colors it will help to
improve the visibility. Wearing such a helmet should be matter of course for all
cyclists. In addition consider to be a good example for children.
9
scott-sports.com
Advertisement
Table of Contents
