Specifications - dbx TR1616 Owner's Manual

SpecificationS

ANALOG INPUTS
Number of Inputs:
Connectors:
Type:
Impedance:
Maximum Input Level:
Gain:
EIN:
CMRR:
Dynamic Range:
Frequency Response:
THD+N:
Interchannel Crosstalk:
ADC Latency:
Phantom Power:
Pad:
Low Cut Filter:
Polarity:
ANALOG OUTPUTS
Number of Outputs:
Connectors:
Type:
Impedance:
Maximum Output Level:
Dynamic Range:
Frequency Response:
THD+N:
Interchannel Crosstalk:
DAC Latency:
24
16
Combination Female XLR and 1/4" Jack
Electronically balanced, RF Filtered
XLR input: 3kΩ,
1/4" input: 20kΩ balanced, 10kΩ unbalanced
XLR Input: +18dBu at minimum gain
1/4" Input: +33dBu at minimum gain
XLR Input: 0 to +60dB
1/4" Input: -15 to +45dB
-125dBu, 22Hz-22kHz, 150Ω source impedance
>40dB, typically 55dB, 22Hz-22kHz
110dB unweighted, 113dB A-weighted
10Hz to 40kHz, +/- 0.25dB at 96kHz
10Hz to 20kHz, +/- 0.25dB at 48kHz
Typically 0.002% at 1kHz, 0dBu XLR input, gain set to minimum
<100dB, 22Hz to 22kHz
37/Fs (0.77msec at 48kHz)
+48VDC, applied to XLR pins 2 and 3 through 6.81k resistors
20dB
2-pole Butterworth filter at 80Hz
Normal or Reverse
16
Male XLR
Cross-Coupled Electronically balanced, RF Filtered
40Ω balanced, 20Ω unbalanced
+20dBu into 2kohm load or greater
112dB unweighted, 115dB A-weighted
10Hz to 40kHz, +/- 0.25dB at 96kHz
10Hz to 20kHz, +/- 0.25dB at 48kHz
Typically 0.006% at 1kHz, 0dBu output
<-100dB, 22Hz to 22kHz
29/Fs (0.60msec at 48kHz)
TR1616
Owner's Manual