Table of Contents
Advertisement
8� 96 kHz LED
This LED will light when the 96 kHz button on the back panel of the TR1616 is engaged,
indicating the TR1616 is configured to clock to a BLU link signal operating at a 96 kHz
sampling rate. When the 96 kHz button is disengaged, the sample rate of the TR1616 is
48 kHz.
9� SNAkE LED
This LED will light when the Snake Enable button on the back panel of the TR1616 is
engaged, indicating the TR1616 has been configured for use in a TR1616 digital snake
network.
10� RECEIVE BANk Display
This dual 7-segment display shows the currently selected bank of BLU link channels
which will be received by the TR1616 and routed to the analog outputs. Each bank
consists of 16 channels. The desired RECEIVE BANK can be selected by adjusting the
slotted control below the display. See "Making Connections–Cabling" > "BLU link" for
further information on this display.
TR1616
Owner's Manual
5
Advertisement
Table of Contents
