Failover Setting - D-Link DWR-116 User Manual

Section 3 - Configuration
This connection can serve as a backup for your default connection.
Failover Type: This option can be set to either Load.Sharing.
or to Failover. With Load.Sharing, the data
usage is distributed evenly over the two
different internet connections. With Failover,
the secondary Internet connection will be
in standby mode, until the primary Internet
connection fails.
Remote Host for This option should be set to an external IP
Keep Alive: address that can be used to ensure that the
3G/4G LTE connection will be kept from going
offline due to inactivity. An example would be
Google's public DNS servers (8.8.8.8 or 8.8.4.4)
or your Internet service providers DNS servers.
Primary WAN: This will automatically be set to the connection
type selected during the Internet.connection.
Setup.Wizard, or set to the My. Internet.
Connection.is option which is found on the
Manual Internet Connections settings page.
Secondary WAN: This can be set by clicking on Add.New.Rule,.
the available options will be shown in the drop
down box that appears.
Click Save. Settings to save your changes,
or click Don't.Save.Settings to discard your
changes.
D-Link DWR-116 User Manual

Failover Setting

23